AD primer or single-coat
| Name | TM | SDB |
|---|---|---|
|
AD 182
2C PUR active primer for steel, aluminium and galvanized steel (sweep-blasted)
|
|
|
|
AD 08
2C PUR active single-coat paint (DTM) for steel, aluminium and galvanized steel (sweep-blasted)
|
|
|
Product informations
- solvent-based system
- 2-component system with thermoplastic properties
- based on polyurethane chemistry crosslinked with isocyanate-based hardener
- spray and brush application
- good corrosion protection properties
- single-coat paint with good UV and weather resistance
- good mechanical resistance
- relatively long pot life
- moderate drying time
- for use over steel, aluminium and galvanized steel (sweep-blasted)
- single-coat paint formulated for ESTA application
EMD ATEX L primer and intermediate coat & ADD ATEX H L topcoat
| Name | TM | SDB |
|---|---|---|
|
EMD 186 ATEX L
2C EP active primer according to ATEX Directive 94/9/EU (ATEX 95) for steel and aluminium
|
|
|
|
EMD 30 ATEX L
2C EP MIOX intermediate coat according to ATEX Directive 94/9/EU (ATEX 95)
|
|
|
|
ADD 47 ATEX H L
2C PUR topcoat according to ATEX Directive 94/9/EU (ATEX 95)
|
|
|
Product informations
- solvent-based system
- 2-component system with thermoplastic properties
- EMD ATEX L epoxy-based primer and intermediate coat crosslinked with amine-based hardener
- ADD ATEX H L polyurethane-based topcoat, crosslinked with isocyanate-based hardener
- spray and brush application
- excellent corrosion protection properties
- good UV and weather resistance
- good mechanical and chemical resistance
- Elektrisch ableitfähig gemäß ATEX-Richtlinie 94/9/EG (ATEX 95)
- static dissipative according to ATEX Directive 94/9/EU (ATEX 95) From an electrostatic point of view, the coating system meets the requirements of DIN EN IEC 60079-0:2019 and is approved for unrestricted use in hazardous areas of zones 0, 1, 2, 20, 21 and 22 in the presence of substances in explosion groups I, IIA, IIB, IIC and III.
- relatively long pot life
- moderate drying time
- evaluation report from Physikalisch-Technische Bundesanstalt (PTB) available
K+S primer, intermediate and topcoat according to TL/TP-KOR-Stahlbauten
| Name | TM | SDB |
|---|---|---|
|
GB-EP-ZP-100
2C EP active primer for steel (blasted)
|
|
|
|
DB-EP-EG-150
2C EP MIOX intermediate coat
|
|
|
|
DB-PUR-80
2C PUR topcoat
|
|
|
Product informations
- solvent-based system approved by K+S
- 2-component system with thermoplastic properties
- epoxy-based primers and intermediate coats crosslinked with amine-based hardeners
- polyurethane-based topcoats crosslinked with isocyanate-based hardeners
- high-resistance coatings designed for heavy-duty corrosion protection of steel structures (e.g. mining with a focus on potash and salt extraction)
- spray and brush application
- excellent corrosion protection properties
- excellent UV and weather resistance
- high mechanical and chemical resistance
- relatively long pot life
- fast drying time
- approval by K+S in accordance with the K+S corrosion protection guideline available
EMC/EMD primer and intermediate coat & ADD topcoat
| Name | TM | SDB |
|---|---|---|
|
EMC 182 K-DB
2C EP active primer for interior and exterior coating of transformer tanks made of steel, aluminium and galvanized steel (sweep-blasted)
|
|
|
|
EMC 182-HS
2C EP active primer for steel, galvanized steel, aluminium, stainless steel and other non-ferrous metals
|
|
|
|
EMD 152
2C EP zinc dust primer, Zn (R), for steel (blasted)
|
|
|
|
EMD 156
2C EP zinc dust primer, economical formulation with a special zinc dust/active pigment combination for steel (blasted)
|
|
|
|
EMD 155
2C EP zinc flake primer with reduced zinc content for steel
|
|
|
|
EMD 30
2C EP MIO intermediate coat
|
|
|
|
ADD 43
C PUR (mica) topcoat
|
|
|
|
ADD 47
C PUR (mica) topcoat
|
|
|
|
EMC 182-HS / 7016 K
2C EP active primer for transformer core laminations, steel, aluminium and galvanized steel (sweep-blasted); heat-resistant up to 180 °C
|
|
|
Product informations
- solvent-based system
- EMC/EMD epoxy-based primer and intermediate coat, crosslinked with amine-based hardener
- EMC/EMD Grund- und Zwischenbeschichtung basierend auf Epoxidbasis, vernetzt mit Härter auf Amin-Basis
HIGHLIGHT
- EMC 182 K-DB is compatible with common insulating liquids used in transformers; suitable as interior and exterior coating for transformer tanks due to its excellent corrosion protection properties
- EMD 155 is based on zinc flake technology which creates a synergistic effect combining cathodic corrosion protection with an effective barrier function. Compared to a Zn (R) primer such as EMD 152, EMD 155 achieves cathodic protection with a significantly lower zinc content, allowing for a reduction of up to 60 %
- EMC 182-HS provides excellent adhesion on steel, galvanized steel, aluminium, stainless steel and other non-ferrous metals
- EMC 182-HS / 7016 K is suitable for dry-type transformers, providing outstanding corrosion protection and adhesion to core laminations; heat resistance up to 180 °CC
- ADD polyurethane-based topcoat crosslinked with isocyanate-based hardener
- spray, brush and flow coating
- excellent corrosion protection properties
- good UV and weather resistance
- good mechanical and chemical resistance
- cost-efficient system
- relatively long pot life
- moderate drying
- Zertifikat zur Kompatibilität von EMC 182 K-DB mit Isolierflüssigkeiten verfügbar
SERIE EP/PUR primer and SERIE PUR topcoat
| Name | TM | SDB |
|---|---|---|
|
SERIE EP 18
2C EP active primer for steel, galvanized steel, aluminium, stainless steel and other non-ferrous metals
|
|
|
|
SERIE PUR 18
2C PUR active primer for steel, aluminium and galvanized steel (sweep-blasted)
|
|
|
|
SERIE PUR 45/47
2C PUR topcoat
|
|
|
Product informations
- olvent-based system for industrial application
- 2-component system with thermoplastic properties
- SERIE-EP epoxy-based primer crosslinked with amine-based hardener with adhesion on steel, galvanized steel, aluminium, stainless steel and other non-ferrous metals
- SERIE-PUR polyurethane-based primer crosslinked with isocyanate-based hardener with adhesion on steel, aluminium and galvanized steel (sweep-blasted)
- SERIE-PUR polyurethane-based topcoat crosslinked with isocyanate-based hardener with direct adhesion on steel and various plastics (ABS, PUR, PA, UP and GFRP)
- spray application
- good corrosion protection in a two-coat system
- excellent UV and weather resistance
- good resistance to a wide range of chemicals
- good mechanical resistance
- interior and exterior use
- moderate pot life
- efficient processing times thanks to fast drying and recoating times
Blatt 87 primer, intermediate coat and topcoat according to TL/TP-KOR-Stahlbauten
| Name | TM | SDB |
|---|---|---|
|
687.03 und 687.04
2C EP zinc dust primer for steel (blasted)
|
|
|
|
687.02 und 687.06
2C EP active primer for steel (blasted)
|
|
|
|
687.12 bis 697.14
2C EP MIOX intermediate coat, DTM for galvanized steel (sweep-blasted) and thermally sprayed zinc
|
|
|
|
687.15 bis 697.18
2C PUR MIOX intermediate coat
|
|
|
|
687.30 bis 687.74
2C PUR MIOX topcoat
|
|
|
|
687.75 bis 687.99
2C PUR topcoat
|
|
|
Product informations
- solvent-based system approved by Bundesanstalt für Straßenbau (BASt) – an established solution
- 2-component system with thermoplastic properties
- epoxy-based primers and intermediate coats crosslinked with amine-based hardeners
- intermediate and topcoats based on polyurethane crosslinked with isocyanate-based hardeners
- highly durable coating materials designed for heavy-duty corrosion protection of steel structures (e.g. bridge and road construction); also suitable for application on hot-dip galvanized steel (sweep-blasted) and thermally sprayed zinc
- spray and brush application
- excellent corrosion protection properties
- excellent UV and weather resistance
- high mechanical and chemical resistance
- cost-efficient system
- relatively long pot life
- moderate drying time
- approval by Bundesanstalt für Straßenbau (BASt) according to TL/TP-KOR-Stahlbauten available
- test report available for Blatt 87 according to Annex E of TL/TP-KOR-Stahlbauten
Blatt 97 primer, intermediate coat and topcoat according to TL/TP-KOR-Stahlbauten
| Name | TM | SDB |
|---|---|---|
|
697.03 und 697.04
2C EP zinc dust primer “fast drying” for steel (blasted)
|
|
|
|
697.02 und 697.06
2C EP active primer “fast drying” for steel (blasted)
|
|
|
|
697.12 bis 697.14
2C EP MIOX intermediate coat “fast drying”, DTM for galvanized steel (sweep-blasted)
and thermally sprayed zinc
|
|
|
|
697.15 bis 697.18
2C PUR MIOX intermediate coat “fast drying”
|
|
|
|
697.30 bis 697.74
2C PUR MIOX topcoat “fast drying”
|
|
|
|
697.75 bis 697.99
2C PUR topcoat “fast drying”
|
|
|
Product informations
- solvent-based system approved by German Federal Highway Research Institute (BASt) – “fast drying”
- fast-drying 2-component systems with thermoplastic properties
- epoxy-based primers and intermediate coats crosslinked with amine-based hardeners
- intermediate and topcoats based on polyurethane crosslinked with isocyanate-based hardeners
- highly durable coating materials designed for heavy-duty corrosion protection of steel structures (e.g. bridge and road construction); also suitable for application on hot-dip galvanized steel (sweep-blasted) and thermally sprayed zinc
- spray and brush application
- excellent corrosion protection properties
- excellent UV and weather resistance
- high mechanical and chemical resistance
- relatively short pot life
- fast drying time enables efficient processing times
- processing and good drying even at low temperatures down to +3 °C
- approval by Bundesanstalt für Straßenbau (BASt) available according to TL/TP-KOR-Stahlbauten
- test report available for Sheet 97 according to Annex E of TL/TP-KOR-Stahlbauten
Blatt 3 primer and
Blatt 40 high-build coating according to DBS 918 300
| Name | TM | SDB |
|---|---|---|
|
603.01
2C EP active primer for steel and aluminium
|
|
|
|
640.01
2C EP MIOX intermediate coat, flexibilized
|
|
|
Product informations
- solvent-based system approved by Deutsche Bahn (DB) in accordance with DBS 918 300
- low-solvent 2-component systems with thermosetting properties
- 603.01 (60–80 µm) epoxy-based primers crosslinked with amine-based hardener; suitable for steel and aluminium; compatible with common insulating liquids used in locomotive transformers; due to excellent corrosion protection properties, suitable for interior and exterior transformer tank coating
- flexible high-build coating 640.01 (140–160 µm): epoxy-based crosslinked with amine hardener
- coating systems for corrosion protection of railway vehicles (e.g. locomotive transformers)
- spray and brush application
- excellent corrosion protection properties
- excellent abrasion and stone chip resistance
- moderate pot life
- fast drying time
- high coverage
- Deutsche Bahn (DB) approval available according to DBS 918 300
- test report for Blatt 3 available according to DBS 918 300, Annex B
- test report for Blatt 40 available according to DBS 918 300, Annex B
- fire protection report by Currenta available according to EN 45545
- certificate available confirming the compatibility of 687.03 with insulating liquids
