ESH primer or single-coat

Name	TM	SDB
ESH 182 2C EP ultra high solid active primer for steel (blasted) and galvanized steel (sweep-blasted)
ESH 00 2C EP ultra high solid MIO single-coat paint (DTM) for steel (blasted) and galvanized steel (sweep-blasted)
ESH 08 2C EP ultra high solid active single-coat paint (DTM) for steel (blasted) and galvanized steel (sweep-blasted)

low solvent, ultra high solid system (UHS) with near-zero VOC content
2-component system with thermoplastic properties
epoxy-based coating crosslinked with amine-based hardener
spray and brush application
150–300 µm film thickness values possible in one spray pass
application on steel (blasted) and galvanized steel (sweep-blasted)
excellent corrosion protection properties
good mechanical and chemical resistance
short pot life (2-component spray equipment required)
fast drying time regardless of film thickness; enables efficient processing times
wet-on-wet coating with subsequent 1K and 2K coating possible
good cost-performance ratio
high coverage

PAS topcoat or single-coat

Name	TM	SDB
PAS 08 2C PAS ultra high solid active single-coat paint (DTM) for steel (blasted) and galvanized steel (sweep-blasted)
PAS 43 C PAS ultra high solid (mica) topcoat
PAS 47 C PAS ultra high solid (mica) topcoat

low solvent, ultra high solid system (UHS) with near-zero VOC content
2-component system with thermoplastic properties
based on polyaspartic, crosslinked with isocyanate-based hardener
spray and brush application
100-150 µm film thickness values possible in one spray pass
used as single-coat paint on steel (blasted) and galvanized steel (sweep-blasted)
good corrosion protection properties in a system with suitable 2C EP primer (e.g. ESD 182 or ESH 182)
good UV and weather resistance
good mechanical and chemical resistance
short pot life (2-component spray equipment required)
fast drying time regardless of film thickness enables efficient processing times
high humidity accelerates drying
good cost-performance ratio
high coverage